by a-1 | Mar 9, 2022 | 未分类
Do you want to see the backside of the Saniline units?Please click on any of the images of Saniline on the catalog page. https://www.cocinc.cn/saniline-catalog/ Our Saniline housings have the bearing slots in front for attaching our safety covers and we don’t want...
by a-1 | Mar 4, 2022 | 未分类
Our Cathodic electrodeposition (CED) coating for our steel covers has excellent corrosion resistance and is environmentally friendly. The laser marking however doesn’t have that same corrosion resistance. As we don’t like to see the rusted sea turtle logo...
by a-1 | Jan 18, 2022 | 未分类
LOCK NUT vs CROSSLOC The adapter locking engages by moving adapter sleeve. The tapered O.D. sleeve moves between the tapered bore inner ring and the shaft to hold the shaft in place. That is usually done by tightening the lock nut to push or pull the adapter sleeve....
by a-1 | Dec 22, 2021 | 未分类
OPEN COVERS FOR SRB UNITS Our bearings will last long and CROSSLOC™ nuts can rust sometimes by rain in outside applications. The new open steel cover with V-ring seal will protect from the dirt and water. This new open cover is being added to our existing end closed...
by a-1 | Oct 5, 2021 | 未分类
日本某纤维企业的蒸汽风机案例 (1900RPM) 更换前SN515 更换前的使用状况为，轴承座的表面温度在两个月内就会达到110℃。润滑脂每两个月更换一次，更换后温度可暂时降至80℃。 因为注油枪无法将内部润滑脂全部更换，每次注油都需要人工将轴承座拆开，清理旧的润滑脂。这个工作就需要两个小时。 更换后CX2SN15-065L 更换为COC产品后，轴承座表面温度升至120℃，内部多余的润滑脂被排出后温度降至80℃。此后一直稳定在65~80℃。...
